Project examples: what typical hardwood jobs look like and what they cost
Hardwood Floors Maple Ontario shows worked examples of typical Ontario area projects — the floor and how it is used, the hardware involved and the market price range such a job carries. Every picture is an AI concept illustration; no installation was performed or arranged through this site.
Worked example pages. The pictures are AI concept illustrations, not photographs; no installation was performed or arranged through this site; prices are typical Ontario area market ranges, not quotes.
Illustration
Worked case: refinishing a 1950s oak living room
Worked example for a living room of original oak in central Ontario, CA: about 300 square feet sanded, stained and refinished, with a lead check, stain samples and typical Ontario price ranges.
Typical total: $1,875–$3,200 (market range, not a quote) · Related service: Hardwood Floor Refinishing
Illustration
Worked case: an open main floor in engineered white oak over a slab
Worked example for an open main floor in Ontario Ranch, Ontario, CA: about 600 square feet of wide-plank engineered white oak glued to a tested slab, with a moisture test and transitions, and typical Ontario price ranges.
Typical total: $8,750–$14,150 (market range, not a quote) · Related service: Engineered Hardwood Installation
Illustration
Worked case: a screen and recoat in a Creekside condo
Worked example for a two-bedroom condo in Creekside, Ontario, CA: about 450 square feet of engineered oak buffed and recoated without sanding, with a wax test and typical Ontario price ranges.
Typical total: $1,050–$2,250 (market range, not a quote) · Related service: Screen and Recoat
Illustration
Worked case: refinishing a staircase of 13 oak treads in Creekside
Worked example for a straight staircase of 13 treads in a Creekside, Ontario, CA two-story home: sanding and refinishing oak treads, masking risers and handrail, with typical Ontario price ranges.
Typical total: $825–$1,900 (market range, not a quote) · Related service: Hardwood Stairs
Illustration
Worked case: refinishing a two-bedroom rental between tenants
Worked example for a two-bedroom rental in east Ontario, CA: about 800 square feet of oak sanded and refinished after a tenant with pets, with a test patch and typical Ontario price ranges.
Typical total: $4,075–$8,200 (market range, not a quote) · Related service: Rental Property Floor Refinishing
Illustration
Worked case: a 1,500 sq ft retail floor recoat near Euclid Avenue
Worked example for a boutique floor near Euclid Avenue in Ontario, CA: about 1,500 square feet of oak recoated after hours in two zones, with traffic paths and moving fixtures, and typical Ontario price ranges.
Typical total: $4,800–$9,900 (market range, not a quote) · Related service: Restaurant and Retail Wood Floors
About these examples
Each example is a hypothetical, typical project for a kind of installation, refinish or business floor that is common in the Ontario area. Every picture is a concept illustration, AI-generated — not a photo of a completed installation — showing the kind of floor the scenario describes. The prices are the same market ranges used by the availability check, shown as ranges because an installer prices the actual job after seeing the floor.
What the ranges include
Each table starts from the per-square-foot range of the floor or service, adds the condition or subfloor surcharge and the options that define the scenario, and multiplies by the size of the floor, exactly as the calculator on the home page does. Add-ons listed under an example are priced the same way. Nothing in these pages is an offer; the ranges describe what such work typically costs locally.
How to use them
Find the example closest to your floor, note the materials and tools it calls for and the typical range, then run the availability check below with your own floor area, the kind of work and the condition of the floor — the range it shows is built from the same table.
Check availability and get your price range
Bookings aren't open yet — a typical Ontario range in about 30 seconds.